The Ingersoll Rand regional director joins the BCAS board as the Society works to close the sector's skills gap, support members through tightening legislation and adapt training to the evolving industrial workplace

[Read More]

Manufacturers face high energy costs, skills shortages and global uncertainty, as Make UK's CEO contends that delivery on Industrial Strategy will determine the strength of the sector’s recovery

[Read More]

As the compressed air sector looks to address a growing skills gap, the Compressed Air and Vacuum Technician apprenticeship is providing a practical route into the industry. Two apprentices explain what the programme has meant for their careers

[Read More]

With more than 500 exhibitors and a programme of live demonstrations and Knowledge Hubs, MACH 2026 will enable manufacturers to explore the technologies shaping the next phase of UK manufacturing

[Read More]

Key focuses for Hayward's tenure will be strengthening quality standards, widening member participation in the areas of compliance and legislation and championing greater inclusivity across the compressed air sector

[Read More]

The strategic partnership addresses the unique challenges facing the UK manufacturing sector through an enhanced collaboration approach

[Read More]

IChemE welcomes the UK’s industrial strategy but stresses the need for clearer delivery, stronger skills investment and sector-specific support to secure lasting benefits

[Read More]

BCAS has appointed Steve Downham as its new technical officer. Working alongside Tim Preece, he brings over 26 years of engineering experience in vacuum technology to the team

[Read More]

Virtual 3D showrooms are changing the landscape for industrial process equipment manufacturers and buyers alike, explains Mark Worger

[Read More]

SOUTHERN MANUFACTURING and Electronics 2025, the UK's premier annual trade fair serving manufacturing in the mechanical and electronic engineering sectors, concluded its most successful show to date in early February.

[Read More]

Marking a decade since signing the Armed Forces Covenant, the MTA reaffirms its unwavering commitment to supporting veterans, reservists, and forces families, says James Selka

[Read More]

Taking place at Farnborough International Exhibition and Conference Centre from 4-6 February, Southern Manufacturing and Electronics 2025 will showcase a comprehensive range of engineering and manufacturing technology and is expected to attract more than 9,000 visitors

[Read More]

With major investments in green tech, skills, and public-private partnerships, the MTA is optimistic that Labour’s vision for re-industrialisation will help drive innovation, boost jobs, and secure the UK’s leadership in sustainable manufacturing, says James Selka

[Read More]

THE UK's manufacturing sector plays a far more significant role in the national economy than is commonly acknowledged.

[Read More]

THE MANUFACTURING Technologies Association (MTA) is delighted to welcome the new government and its robust commitment to revitalising the UK’s manufacturing and technology sectors.

[Read More]

THE PPMA Show organisers, Automate UK, have been busy planning the UK’s largest processing and packaging event to ensure it will be yet another spectacular show between 24-26 September at the NEC Birmingham.

[Read More]

The award-winning Nineteen Group have announced a full programme of STEM activities that will take place under the banner Manufacturers and Engineers of the Future at Smart Manufacturing and Engineering Week on 6 June at Birmingham’s NEC.

[Read More]

The 2024 edition of MACH provided a showcase for buyers and visitors to experience the latest solutions and technologies from a comprehensive line-up of over 500 exhibitors

[Read More]

Metal surface specialist BEP Surface Technologies has established an R&D consultancy - BEP Solutions - which will address contemporary manufacturing and engineering challenges including around hydrogen and EV battery production

[Read More]

As BCAS' new executive director designate, Ashley Quarterman affirmed his commitment to continuing the Society's ongoing projects

[Read More]

Babcock Wanson thermal fluid heaters are multi-pass, fired heaters designed to operate in a diverse range of industries and with a wide variety of heat transfer fluids. A variety of liquid or gaseous fuels can be used. EPC EL electric heated units are also available.

[Read More]

Babcock Wanson Fire Tube Boilers provide high quality dry steam, whilst maintaining low fuel consumption and operating costs. When fitted with a matched economiser and heat recovery system, efficiencies of 98% plus can be achieved

[Read More]

A senior lab test engineer at diversified technology company 3M has been awarded the prestigious Bob Bentley Bursary by the International Society for Respiratory Protection (ISRP)

[Read More]

HV Electrode Boilers are bespoke solutions to suit the site needs and electrical infrastructure. Typically 50:1 turndown, they can ramp from hot standby to full output in under 60 seconds. Boiler design pressures from 10 barg up to 85 barg depending on size.

[Read More]

Babcock Wanson offers customers a single-source solution by providing not only boiler house equipment, but also high-quality water treatment services to ensure equipment works to maximum efficiency and longevity.

[Read More]

The Verderflex® Peristaltic Cased Tube Pump range are ideal for benchtop, laboratory and process environments. Tube pumps are perfect for lower flow rates, are fully programmable, with the option of multiple heads. These types of pump provide accurate dosing and repeatability and are capable of handling viscous and chemically aggressive liquids as well as shear sensitive products.

[Read More]

Diversified technology company 3M has recently made a donation of approximately £2,000 worth of Personal Protective Equipment (PPE) to a branch of a youth charity, local to its UK headquarters in Bracknell, Berkshire

[Read More]

Typical consumables for the Verderflex® pumps are hoses, tubes, lubricants and accessories like pulsation dampers, custom base plates, quick change hoses and more. It is recommended that these consumables be used with Verderflex® pumps for better performance and low operational costs.”

[Read More]

Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to use, easy to control, versatile and reliable way to pump liquids.

[Read More]

Babcock-Wanson has over 50 years of experience in the design and manufacture of electric boilers. Our electric boilers provide zero CO2 emissions on site. Simple to install, they offer high efficiency with ease of operation.

[Read More]

Babcock Wanson’s range of services are designed to ensure you receive the best after sales support possible, whether you simply need a replacement part through to a maintenance service contract or training, right up to a complete boiler room refurbishment.

[Read More]

With over 480 Thermal Oxidisers installed worldwide, Babcock Wanson has unrivalled expertise in Thermal Oxidiser technology.

[Read More]

The Verderflex® OEM range of tube pumps are designed for panel mounting or incorporation into 3rd party machines that need an accurate, low maintenance dosing solution that can be found in many applications such as printing, packaging, chemical dosing, vending machines, water treatment and more.

[Read More]

FLIR Thermal Studio is a thermal image analysis and reporting software designed to manage large sets of thermal images and videos.

[Read More]

Multi-pass coil Steam Boilers with in-built combustion air pre-heater to give high operating efficiency, Babcock Wanson’s VAP RR, VAP LN & E-VAP have been designed for simple, reliable, long-life operation.

[Read More]