Home >REDUX Wave Springs available from Lee Spring UK
ARTICLE

REDUX Wave Springs available from Lee Spring UK

17 August 2016

For optimum performance in space limited environments the Lee Spring REDUX Wave spring series of ex-stock flat wire compression springs can replace conventional round wire compression springs.

Wave springs can reduce the size and weight of the assembly by as much as 50%. Generally wave springs occupy 30-50% of the compressed height space of comparable round wire springs offering more deflection with the same load specifications. This not only provides for space savings, but also smaller assemblies that use less materials, hence lower production costs.

REDUX Wave springs are designed to be used over a rod/mandrel or in a hole/tube for support, thus preventing distortion and so ensuring longevity in service. They are manufactured from a single filament of Type 17-7 Stainless Steel flat wire formed in continuous precise coils with uniform diameters and waves. Careful selection of alternative materials is required for operating environments such as high temperatures and corrosive media.

Wave springs are found where structural considerations restrict the installation height, or where uniform force distribution is needed and/or uniform rotational pressure is required over 360°. They are suitable for both static and slightly dynamic load applications.

Lee Spring’s REDUX Wave spring series now includes designs to fit 1/4" and 5/16" hole diameters, as well as additional designs in the 1/2", 9/16" and 5/8" ranges.

Further information on Lee Spring products can be found on their website - www.leespring.co.uk or follow them on twitter - https://twitter.com/leespringuk.

 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
 
 
TWITTER FEED