
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Plant, Process & Control | >Process equipment | >ATEX approved systems |
ARTICLE
ATEX approved systems
25 January 2013
Machine protection and condition monitoring specialist, Sensonics, has enhanced its range of DN803X series shaft vibration and thrust position transmitters following approval for intrinsically safe applications. The D

Machine protection and condition
monitoring specialist, Sensonics, has
enhanced its range of DN803X series
shaft vibration and thrust position
transmitters following approval for
intrinsically safe applications.
The DN8031 (vibration) and DN8033 (thrust position) proximity probe systems are now suitable for Ex ia IIC T4 applications when used in conjunction with Sensonics ATEX approved range of AECP proximity probes and AEXC extension cables.
The 4-20mA loop powered modules provide easy integration with either the local machine PLC or a plant-wide DCS since it is powered through the safety barrier measurement loop. Signal processing is carried out within the unit giving an output current proportional to either peak-to-peak shaft vibration or relative position to the probe face.
The module permits adjustment of both gain and offset for ease of calibration to suit the application.
The DN8031 (vibration) and DN8033 (thrust position) proximity probe systems are now suitable for Ex ia IIC T4 applications when used in conjunction with Sensonics ATEX approved range of AECP proximity probes and AEXC extension cables.
The 4-20mA loop powered modules provide easy integration with either the local machine PLC or a plant-wide DCS since it is powered through the safety barrier measurement loop. Signal processing is carried out within the unit giving an output current proportional to either peak-to-peak shaft vibration or relative position to the probe face.
The module permits adjustment of both gain and offset for ease of calibration to suit the application.
MORE FROM THIS COMPANY
- Free guide to monitoring vibration
- Robust machine monitoring
- Cost-effective monitoring and protection for smaller plant
- Integrated proximity probe
- Machine monitoring
- Capacitive air gap sensor
- Vibration sensor for low speed rotating machinery
- Seismic safety switch
- Low-cost accurate movement detection
- Proximity probe holders for ATEX/IECEx hazardous areas
OTHER ARTICLES IN THIS SECTION