Home>Premises management/maintenance>Lighting>Batten mount PIR occupancy switch range extended
ARTICLE

Batten mount PIR occupancy switch range extended

03 June 2013

Danlers has extended its range of cost effective, energy saving occupancy switches with 3 new ‘Passive’ controls. Each control has a photocell override, so switching may be determined either by occupancy and lux level or by occupancy only. This is particularly useful in low light level environments.

These new controls are in addition to Danlers’ recently launched ‘Intelligent’ Batten Mount controls with a one touch calibration process that distinguishes the difference between artificial and natural light delivered to the photocell, resulting in optimised switching levels and enhanced energy savings.

UK-manufactured, the IP53 rated controls can switch lighting loads of up to 10A and can be mounted onto the end of lighting battens.

They detect movement of a warm body within their detection zones (either 5m or 10m variants) and include a photocell which can be set to between 100 and 3000 lux.


 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
 
 
TWITTER FEED