Edward Lowton
Editor |
Home> | Production Engineering | >Cutting systems | >Waterjet cutting tables |
ARTICLE
Waterjet cutting tables
25 January 2013
Available from Wightman Stewart, UK WARDJet agent, the Z-Series of cutting tables is designed for both pure water and abrasive waterjet cutting. The sturdy gantry machines come in three different sizes: Z-45, Z-513 and
Available from Wightman Stewart,
UK WARDJet agent, the Z-Series of
cutting tables is designed for both
pure water and abrasive waterjet
cutting. The sturdy gantry machines
come in three different sizes: Z-45,
Z-513 and Z-2043.
With its solid cutting bed, the ZSeries can accept all kinds of material from sheet metal to granite.
WARDJet's modular multi-purpose grating system allows parts to be loaded and clamped rigidly anywhere on the table with no risk of movement. Different grate systems can be used simultaneously allowing one part of the table to be set up for water only cutting and the other for abrasive cutting.
The Z-Series features ball screws and laser calibration of all systems to map all ball screws. For rigidity the X axis has two linear ways and four bearings per cutting head.Multiple independent cutting heads sited on the X Axis Crossbeam can be provided.
Separate cutting heads on independent Z-Carriages means heads can be placed as close or as far apart as desired within seconds. Each Z carriage has its own motor driven height adjustment easily configured to incorporate independent height sensors.
With its solid cutting bed, the ZSeries can accept all kinds of material from sheet metal to granite.
WARDJet's modular multi-purpose grating system allows parts to be loaded and clamped rigidly anywhere on the table with no risk of movement. Different grate systems can be used simultaneously allowing one part of the table to be set up for water only cutting and the other for abrasive cutting.
The Z-Series features ball screws and laser calibration of all systems to map all ball screws. For rigidity the X axis has two linear ways and four bearings per cutting head.Multiple independent cutting heads sited on the X Axis Crossbeam can be provided.
Separate cutting heads on independent Z-Carriages means heads can be placed as close or as far apart as desired within seconds. Each Z carriage has its own motor driven height adjustment easily configured to incorporate independent height sensors.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION