
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Health, Safety & Welfare | >Breathing safely | >Detects gases at odour stage |
ARTICLE
Detects gases at odour stage
25 January 2013
The Draeger ChemLogic range of colorimetric gas detection systems is designed to detect low levels of toxic and corrosive gases at the odour stage, is suitable for use in the waste and water industry and requires no cal

The Draeger ChemLogic range
of colorimetric gas detection
systems is designed to detect
low levels of toxic and corrosive
gases at the odour stage, is suitable
for use in the waste and water
industry and requires no calibration.
Featuring built-in data logging to record concentrations over time, systems are suitable for perimeter monitoring tasks and can be used to predict breakdowns or to identify reduced efficiency in stack scrubber applications. The ChemLogic Series forms part of a new generation of interference-free, continuous monitors featuring optic technology.
The ChemLogic 1 is a single-point detector. For greater monitoring capability, the ChemLogic 8 has eight detection points and an optimised flow that draws samples at 250-300ft 2.5 LPM. In addition, by removing the use of O-rings, the system helps to ensure a cleaner interface between the optic, sample stream and tape.
Including a new 'reference' LED, the ChemLogic automatically adjusts the LED brightness and a new TRIcoloured LED (RGB) has also been incorporated.
With built-in compact flash card technology and data logging capabilities, the ChemLogic 1 provides an integral log of event history. The ChemLogic 8 features a main analysis screen showing all 8 points at any one time to identify concentration, point status and gas type.
Featuring built-in data logging to record concentrations over time, systems are suitable for perimeter monitoring tasks and can be used to predict breakdowns or to identify reduced efficiency in stack scrubber applications. The ChemLogic Series forms part of a new generation of interference-free, continuous monitors featuring optic technology.
The ChemLogic 1 is a single-point detector. For greater monitoring capability, the ChemLogic 8 has eight detection points and an optimised flow that draws samples at 250-300ft 2.5 LPM. In addition, by removing the use of O-rings, the system helps to ensure a cleaner interface between the optic, sample stream and tape.
Including a new 'reference' LED, the ChemLogic automatically adjusts the LED brightness and a new TRIcoloured LED (RGB) has also been incorporated.
With built-in compact flash card technology and data logging capabilities, the ChemLogic 1 provides an integral log of event history. The ChemLogic 8 features a main analysis screen showing all 8 points at any one time to identify concentration, point status and gas type.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION