
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Plant, Process & Control | >Cables & Connectors | >Single cable entry plate |
Home> | Production Engineering | >Cables, connectors and energy chains | >Single cable entry plate |
Single cable entry plate
21 November 2019
The latest cable entry plate from icotek, the KEL-SCDP, is used to insert single cables without plugs and can be sealed to IP65.

The KEL-SCDP has a sealing range of 5 to 36mm. The assembly and the routing of cables are kept simple. Depending on the cable / hose diameter, the sealing grooves can be easily peeled off to the required sealing area. No knife or cutter is needed for this. The special 'peeling principle' leads to circular holes in the membrane.
icotek says another advantage is the large clamping area on which the KEL-SCDP can be mounted. The KEL-SCDP can be mounted without tools on wall thicknesses of 1.5 to 4.0mm.
An additional version KEL-SCDP-RW is approved for use in the the railway sector according to EN45545-2 HL3.
The KEL-SCDP and the KEL-SCDP-RW are available in four different sizes.
https://www.icotek.com/en-uk/product-catalogue/cable-entry-plates/kel-scdp/
- EMC spring-loaded shield brackets
- icotek grommet with staged membrane rings
- New cabinet floor entry system
- Cable grommets
- Hygienic design for cable entry plate
- QTMB grommet: One size fits all
- Tool-free mountable cable entry plates
- M25 cable gland in hygienic design
- Hybrid cable entry possible with new grommet
- Shield clamp complies with PROFINET