Home >Plant, Process & Control>Electrical components
PRODUCTS & SERVICES

1/6     (1 to 20 of 111)

29 March 2022

IN THE municipality of Saint-Bonnet-de-Mure global expert in electrical power, Mersen, runs a test lab which carries out approximately 10,000 electric, dielectric, mechanical and environmental tests, primarily on fuses and fuse gears, such as those that protect semiconductors, cables or motors. The test centre is accredited by France’s COFRAC and in accordance with the ISO-17025 standard.

[Read More]


29 March 2022

WITH THE new DC2412-UPSP2, Bicker Elektronik offers reliable protection against critical system failures and data loss.

[Read More]


20 December 2021

THE HYBRID terminal blocks from Phoenix Contact enable different connection technologies to be used for the interior and exterior sides of a control cabinet

[Read More]


23 December 2021

DELTA ELECTRONICS’ Flex series family has been expanded with the addition of four new three-phase inverters

[Read More]


24 January 2022

SCHMERSAL GROUP's PS216-Q200/-Q210 pull-wire switch can be used as a signal generator to perform multiple functions in one pull.

[Read More]


27 September 2021

A FURTHER consignment of activated isolation, modulation, fire and gas damper junction boxes has been dispatched by IndEx Enclosures to the Tengiz oilfields of Kazakhstan.

[Read More]


20 August 2021

WITH THE global semiconductor shortage continuing to impact global production schedules, ESI Automotive is urging automotive OEMs to take a systems-level look at their supply chains and take immediate action to minimise the risk of over-reliance.

[Read More]


30 July 2021

THE INTELLIGENT DC emergency power supply UPSI-2412 from Bicker Elektronik in combination with suitable LiFePO4 or Supercap energy storage devices, reliably bridges power failures and brownouts, so that the uninterruptible 24 VDC power supply of process-relevant systems is guaranteed at all times.

[Read More]


02 August 2021

A NEW generation of FlexFusion ITE cabinets from Panduit can be custom-configured to meet the specific needs of any ITE environment.

[Read More]


02 August 2021

Quick installation, with focus on safety: Mersen offers two versions of its new NH fuse switch disconnector series in size 000. The Multibloc 000.RST9 is being launched as a bus bar version for mounting on 60mm bus bar systems, while the Multibloc 000.ST9 is available in the mounting plate version with a width of only 53mm.

[Read More]


29 March 2021

IN ADDITION to the need for high levels of safety, economic efficiency and machine availability were key considerations during the development of the innovative door locking mechanism CTM from Euchner.

[Read More]


07 April 2021

NEW FROM Bicker Elektronik, the UPSI-2406DP2 uninterruptible DC power supply is equipped with fast-charging Supercaps as energy storage devices and reliably bridges power failures, voltage drops and flicker in the 24V power supply for DC loads up to 100W.

[Read More]


24 March 2021

INDUSTRIAL ENCLOSURES need to be rugged, but they also have to be flexible enough to create the right design for the application’s requirements. With a wide range of options available for the GEOS industrial enclosure range, Spelsberg’s new configurator now makes specification and selection a faster, easier task. Chris Lloyd, MD of Spelsberg UK, explains the advantages of the GEOS enclosure configurator.

[Read More]


01 February 2021

THE THN 20WIR Series from Traco Power is the company's next generation 20W DC/DC converter. It comes in a six-side shielded 1 x1in metal package and has EN 50155 and EN 61373 approval for railway applications.

[Read More]


30 November 2020

THE TSR-E, TEA, TBA and TEC series of low-cost DC-DC converters are available from 1 to 3 watts and cover 12 new product families.

[Read More]


30 November 2020

Panduit has joined ETIM International (a classification standard for technical products) and incorporates the classification model into its product development, reference systems and documentation.

[Read More]


18 June 2020

New EMC shield clamps LFC-MSKL and LFC-SKL from Icotek are used for mounting with clamps on C-rails.

[Read More]


28 November 2019

A new white paper – M12 Power (L-coded) – is available from Murrelektronik.

[Read More]


26 November 2019

Sensata Technologies has launched two 3-phase DIN rail and panel mount solid state relays (SSRs) – DR67 and PM67 – for use in a variety of industrial power applications.

[Read More]


11 October 2019

New switches, relays and pressure sensing solutions from Sensata Technologies are helping to ensure the smooth and efficient operation of access control equipment installed in a range of demanding and often remote environments.

[Read More]


1/6     (1 to 20 of 111)

FEATURES

23 April 2020

Heard of the hover fly? Adorned with black and yellow stripes, these creatures take advantage of the wasp’s fearsome reputation by using mimicry to repel predators. Deception in nature is fascinating, but in the industrial equipment world, false imitation can be problematic. Here, Nigel Smith, managing director of Shibaura Machine robot distributor, TM Robotics, explains why counterfeit industrial equipment could present a ticking time bomb for manufacturers.

[Read More]


04 September 2013

Richard Hale, managing director of Deritend Industries, explains how a more holistic approach to the maintenance of electrical and mechanical equipment can deliver tangible benefits to the bottom line.

[Read More]


SPONSORED CONTENT

VIDEO OF THE MONTH