|
Edward Lowton
Editor |
|
| Home> | Plant, Process & Control | >Sensors and instrumentation | >Dual trip module |
ARTICLE
Dual trip module
25 January 2013
The HS-510 dual trip amplifier module can be used with Hansford Sensors' range of industrial accelerometers where vibration levels need to be monitored, tripping alarm relays at predetermined points. The HS-510 will a
The HS-510 dual trip amplifier
module can be used with Hansford
Sensors' range of industrial
accelerometers where vibration levels
need to be monitored, tripping
alarm relays at predetermined points.
The HS-510 will accept inputs of 0 to 10V DC or 4-20mA, which can be direct from HS-420 industrial accelerometers or via other Hansford Sensor modules such as the HS-530, HS-535, HS-556 or HS-557.
The front panel digital display lets the operator set the trip values which, when exceeded, operate the internal dual relays, the contacts of which can be used for visual or audible alarms or to control or shutdown machinery or process plant.
The HS-510 will accept inputs of 0 to 10V DC or 4-20mA, which can be direct from HS-420 industrial accelerometers or via other Hansford Sensor modules such as the HS-530, HS-535, HS-556 or HS-557.
The front panel digital display lets the operator set the trip values which, when exceeded, operate the internal dual relays, the contacts of which can be used for visual or audible alarms or to control or shutdown machinery or process plant.
MORE FROM THIS COMPANY
- Accelerometers: New kits cut fitting times
- Bearings: Early detection of failure
- Enhanced monitoring
- Vibration monitoring
- Vibration switch designed to protect critical assets
- Accelerometers in the spotlight
- White paper on ATEX directives
- Early detection of bearing damage: New white paper
- Mounting magnets
- Compact kit for monitoring vibration
OTHER ARTICLES IN THIS SECTION
