
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Handling and Storing | >Lifting equipment | >Goodsmaster Classic |
Goodsmaster Classic
17 July 2013
Our traditional goods-only Goodsmaster Classic range has 13 models that can carry from 500 - 1500kg. (Please contact Stannah if you require larger lifts outside of this range.)

The lifts are designed to make easy work of heavy loads and they are particularly used to reach elevated storage areas, often on mezzanine levels. Goodsmasters are installed within their own structure almost anywhere in a matter of days (subject to builders’ work). With a choice of hinged or concertina doors, there is a Goodsmaster for almost every situation.
Specifications
Car
Constructed from mild steel sheeting; finished in a tough
grey baked enamel RAL 7038 with heavy duty vinyl covered floor.
Speed
0.13–0.20m/s
Entrances
Single hinged steel door on 1060mm wide lift cars. Double
hinged steel doors on 1360mm and 1460mm wide lift cars. Finished in grey
baked enamel RAL 7038. Collapsible concertina gates are available as an
option on all Goodsmaster Classic models.
Car entrance protection
A collapsible gate is fitted to the lift car entrance(s) as standard.
Entry choice
Up to two entrances can be fitted on each floor (single entrance or through-car).
Controls
Fully automatic push button control with call and despatch facilities at each landing entrance.
Indicators
"Lift arrival” and "lift occupied” indicators are fitted at
each entrance for extra reassurance, together with an audible lift
arrival buzzer.
Travel
Up to 5 stops over a total distance of 15m of travel.
Mounting
The Goodsmaster Classic is supplied in a structure supported
frame which does not need load-bearing shaft walls. A solid flat base,
support at each floor and at the top, together with a pre-formed lift
shaft by your builder, is all that is required. Stannah can supply
non-fire rated sheet steel shaft cladding in RAL 7038 as an option.
Motor/winding unit
Mounted on a bedplate fixed to the lift’s structure
(external to the shaft). The motor drives a high quality reduction
gearbox with 2:1 traction roping (3:1 on 1500kg model). Efficient and
quiet in operation.
Safety
Goodsmaster Classic models comply with the Essential
Safety Requirements (ESRs) of the Supply of Machinery (Safety)
Regulations, also known as the Machinery Directive.