Home >Cost savings promised
ARTICLE

Cost savings promised

25 January 2013

The LINE-Dry System from ACI reduces running costs compared to compressed air nozzle arrangements, says the company.

Until now, the removal of the residual moisture film from water-cooled insulated wire/cable and extruded products has been difficult to achieve efficiently and cost effectively, says ACI.

The company's new 'LINE-Dry' System solves this problem, saving energy and reducing running costs when compared to compressed air nozzle arrangements and other existing blower-driven devices.

When compared to compressed air systems up to 10 fold energy savings can be achieved which potentially equates to savings of £1000s per annum. Free on-site trials are available to potential UK customers.

ACI's blower powered LINE-Dry system can handle products up to 25mm in diameter at speeds of 500m/min. The blower is an ACI variable speed 'Multi-Stage' unit controlled via a speed controller, which gives flexibility to accommodate different products and line speeds.

Two versions are available, one with the dryer heads enclosed to contain displaced moisture the other is an open unit.

The enclosed unit has a pair of facing air delivery plenums. These can be adjusted to suit different product dimensions and are also sprung to allow flexing to accommodate any product distortions/kinks. A series of baffles serves to isolate wet and dry areas and guard against moisture being re-deposited on the dried product.

The second option comprises two pairs of facing drying heads. These too are sprung to allow for product imperfections.

With both versions, the blower and speed controller are mounted on legs and enclosed in an ABS plastic enclosure.

Air is delivered at up to 2.8psi (80in. SWG) at speeds of 8,800m/min (28,900ft/min) at 80oC.
 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
 
 
TWITTER FEED