
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Production Engineering | >Machine centres and tools | >Auto tool change |
ARTICLE
Auto tool change
25 January 2013
XYZ Machine Tools will present its new ProtoTRAK LPM (Lean Production Machine), the first ProtoTRAK-equipped machine tool to be fitted with an automatic tool changer. The ATC can hold up to 16 tools and this 15 hp/8000

XYZ Machine Tools will present its
new ProtoTRAK LPM (Lean
Production Machine), the first
ProtoTRAK-equipped machine tool
to be fitted with an automatic tool
changer. The ATC can hold up to 16
tools and this 15 hp/8000 rev/min
BT40 vertical spindle machine has
axis travels in X, Y and Z of 785, 470
and 530mm respectively, with rapid
feeds in all three axes of 20m/min.
The LPM has a number of features in addition to the 'plain English' programming of its ProtoTRAK control system that differentiate it from a standard vertical machining centre. The most significant is the integral ball lock system machined into its 900 by 500mm table, which provides a highly repeatable and accurate workholding mechanism.
Stand 5561
The LPM has a number of features in addition to the 'plain English' programming of its ProtoTRAK control system that differentiate it from a standard vertical machining centre. The most significant is the integral ball lock system machined into its 900 by 500mm table, which provides a highly repeatable and accurate workholding mechanism.
Stand 5561
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION