|
Edward Lowton
Editor |
|
| Home> | Production Engineering | >Welding | >Inverter welder |
ARTICLE
Inverter welder
25 January 2013
GYS has launched a new microprocessorcontrolled TIG 200 HF DC FV ( Flexible Voltage) welder using inverter welding technology. The low cost welder, suitable for both 110V TIG and MMA welding using 1,6 to 4.0mm el
GYS has launched a new
microprocessorcontrolled
TIG 200
HF DC FV ( Flexible
Voltage) welder using
inverter welding
technology.
The low cost welder, suitable for both 110V TIG and MMA welding using 1,6 to 4.0mm electrodes, is designed for pipe welders and boilermakers, as wel maintenance work using mild steel, stainless steel and copper.
The single phase, 230V machine is rated 200A @ 40% duty cycle for normal use at 20°C and has an 85V OCV. TIG 200 HF DC FV employs the latest GYS technology with both flexible voltage and PFC (Power Factor Correction) allowing it to automatically adapt to any voltage in the range 85V- 265V. The PFC device enables the machine to maintain its high welding performance on sub-optimal power supplies.
The low cost welder, suitable for both 110V TIG and MMA welding using 1,6 to 4.0mm electrodes, is designed for pipe welders and boilermakers, as wel maintenance work using mild steel, stainless steel and copper.
The single phase, 230V machine is rated 200A @ 40% duty cycle for normal use at 20°C and has an 85V OCV. TIG 200 HF DC FV employs the latest GYS technology with both flexible voltage and PFC (Power Factor Correction) allowing it to automatically adapt to any voltage in the range 85V- 265V. The PFC device enables the machine to maintain its high welding performance on sub-optimal power supplies.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION
