
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Energy Management | >Boilers and burners | >Royalist range |
ARTICLE
Royalist range
25 January 2013
Hoval's UK-made Royalist range of hot water boilers is available in standard BS EN14394 versions (13 models up to 10 bar and 10MW) and the Royalist-H BS EN12953 high temperature model (13 models up to 27 bar and 12MW).

Hoval's UK-made Royalist range of
hot water boilers is available in
standard BS EN14394 versions (13
models up to 10 bar and 10MW)
and the Royalist-H BS EN12953 high
temperature model (13 models up to
27 bar and 12MW). Net efficiencies
are to 92% with efficient thermal
insulation to reduce standing losses
to, typically, 0.3%.
The conventional three-pass wet back, steel shell boiler, due to its generous boiler water content, requires no minimum water flow rate. It is suitable for firing with a range of matched burners, for use with gas (including bio-gas), oil (including bio-diesel) or dual fuel.
Condensing versions are available using the Hoval Thermocondensor or bespoke economisers.
All units have sophisticated controls to optimise performance, operating on a stand-alone basis or interfaced to a building management system. Hoval's TopTronic controls are also available for higher levels of control functionality.
The conventional three-pass wet back, steel shell boiler, due to its generous boiler water content, requires no minimum water flow rate. It is suitable for firing with a range of matched burners, for use with gas (including bio-gas), oil (including bio-diesel) or dual fuel.
Condensing versions are available using the Hoval Thermocondensor or bespoke economisers.
All units have sophisticated controls to optimise performance, operating on a stand-alone basis or interfaced to a building management system. Hoval's TopTronic controls are also available for higher levels of control functionality.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION