Home >Energy Management>Boilers and burners
PRODUCTS & SERVICES

1/14     (1 to 20 of 275)

23 October 2020

MANUFACTURER OF plastic spill containment products, Romold, is benefiting from the latest process gas heating technology from Lanemark Combustion Engineering. The Lanemark FDGA forced draught burner system used in rotational moulding operations is delivering benefits in terms of both improved operations and greater energy efficiency.

[Read More]


04 August 2020

Heat transfer specialist, Fulton, is all too aware of the effect COVID-19 has had on its customers and the wider industry. As many steam boilers have been shut down during this period, it is offering a Restarting Workplace Pressure Systems Safely package.

[Read More]


15 June 2020

A skid-mounted, 2 x VSRT-60 gas-fired steam boiler solution from Fulton is installed at Elis' new laundry in Southampton.

[Read More]


 border=
06 April 2020

If you’re specifying steam raising plant for a new project, or even replacing ageing steam boilers, Fulton says don’t just consider the initial capital costs, but look at the bigger picture.

[Read More]


16 March 2020

A burner upgrade project at a visitor attraction in Edinburgh involved replacing 25-year-old burners with Riello ultra-low nitrogen oxides (NOx) premix burners.

[Read More]


11 March 2020

In response to increasing customer demand, Energy Technology and Control has launched the ETC6076, a 7-inch touch screen HMI for use on the ETC6000 series of burner controllers.

[Read More]


06 February 2020

A burner upgrade project at a prestigious visitor attraction in Edinburgh involved replacement of the site's 25-year-old burners with Riello ultra-low nitrogen oxides (NOx) premix burners.

[Read More]


26 November 2019

Riello RX premix packaged burners are available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with high turndown ratios of up to 8:1, across a range of models.

[Read More]


05 December 2019

Fulton continues to strengthen its team with a number of senior roles changes.

[Read More]


11 September 2019

Joining Lanemark Combustion Engineering's FD range, the FDB packaged or semi-packaged burner offers additional advantages in terms of location and, importantly, flame profile.

[Read More]


15 August 2019

Installation of a Fulton VSRT boiler has helped Fillongley Spring Water boost throughput and reduce its gas consumption.

[Read More]


03 August 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, and turndown ratios of up to 8:1, across a wide range of models.

[Read More]


23 September 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with turndown ratios of up to 8:1, across a range of models.

[Read More]


14 June 2019

Launched in 2018, Fulton’s VSRT steam boiler is catching the eye of those judging product and innovation awards.

[Read More]


05 April 2019

Part of Hoval's high efficiency, low NOx steel shell boiler range, Max-3 E and Max-3 condens E each come in four sizes in outputs to 6800kW in gas and dual fuel options.

[Read More]


05 April 2019

Based on modular architecture, Lamtec’s CMS (Combustion Management System) offers a high degree of flexibility, allowing users to meet the most demanding of combustion applications.

[Read More]


11 March 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with high turndown ratios to 8:1, across a wide range of models.

[Read More]


08 March 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with high turndown ratios of up to 8:1, across a wide range of models.

[Read More]


08 March 2019

The Max-3 E and Max-3 condens E join Hoval's high efficiency, low NOx steel shell boiler range. Each model is available in four sizes in outputs to 6800kW in gas and dual fuel options.

[Read More]


04 April 2019

Green’s and Thornhill have formed a partnership which, they say, makes them the UK’s largest provider of design, manufacture and support services for heat exchanger and boiler equipment.

[Read More]


1/14     (1 to 20 of 275)

FEATURES

1/2     (1 to 20 of 36)

25 September 2020

A steam boiler is just one part of an often complex and well-engineered steam system that requires the correct ancillary equipment to ensure process uptime and system longevity. But what are these ancillaries for and why do we need them? Ruth Price looks into the products that turn a boiler into a fully-fledged process steam solution.

[Read More]


08 June 2020

From the first industrial revolution to the fourth, inspirational change has been driven by a willingness to embrace the unconventional and cross traditional industry boundaries. A partnership between one of the UK’s oldest and best-known boiler manufacturers, Byworth Boilers with SICK’s industrial instrumentation division, has helped fine-tune its boiler house controls to save up to 7% on customer fuel bills

[Read More]


05 November 2019

When insurance inspectors recommended that 10 heating and hot water boilers at a leading UK University be replaced due to substandard quality, it was discovered that the original supplier had not only switched production of its boilers without informing the university, but worse still, was itself no longer trading. Thankfully, expert assistance from renowned hot water and steam specialist, CFB Boilers, helped to solves the issue.

[Read More]


13 March 2019

Martin Cooke, technical director for Baltur in the UK, discusses the considerations to bear in mind when selecting a replacement industrial heating system.

[Read More]


15 November 2018

Fluid Heater installations are generally at the simpler end of the spectrum when compared to a complex steam plant, so it came as something of a surprise to Babcock Wanson UK when it was approached by a company asking if it could create a 1MW fluid heater to operate at 275 bar pressure and reach a temperature 490°. Chris Horsley, managing director, explains more

[Read More]


26 April 2018

Boilerhouse managers and operators are constantly battling with rising energy prices. With pressure to remain competitive and reduce costs, the search to combat energy consumption is top of the wish list. Chris Coleman, boilerhouse national specialist at Spirax Sarco, argues that truly efficient condensate recovery can boost productivity and improve regulation, at a much lower cost to steam users than we might imagine

[Read More]


23 April 2018

Chris Horsley, managing director of Babcock Wanson explains the efficiency improvements and energy savings that are achievable by using thermal fluid heating systems with integral economisers, and questions why more companies aren't reaping the benefits of this proven technology

[Read More]


30 May 2017

The Combustion Engineering Association has introduced 'I-GAS', a new qualification for maintenance and gas fitters working in industry. David Kilpatrick, director of the CEA, explains more

[Read More]


30 March 2017

Industrial boilers can be an expensive item of machinery, and of course, fundamental to keeping plants operational. Given these facts, it’s clear that ensuring that their lifespan is extended as much as possible and that unplanned outages are minimised is essential. It real is a case of 'prevention is better than cure', according to Neil Ford, aftermarket manager at Green’s

[Read More]


13 March 2017

If you’re currently, or will be in the future, looking to invest in an industrial boiler then these tips from Stephen Fleming, sales project engineer at Byworth Boilers, may help your decision-making process

[Read More]


17 March 2017

Chris Horsley, managing director of Babcock Wanson, explains the important role that heating plays in the supply and management of bitumen, and the financial and environmental benefits of using thermal fluid heating

[Read More]


05 December 2016

Steam has been a valuable servant to the human race, from a means of powering engines to a method of cooking food. However, according to Clive Jones, CEO of Global Heat Transfer, there is an area where steam has been outdone in recent years – heat transfer using thermal fluid

[Read More]


06 September 2016

Lower total life costs are among a number of benefits delivered by liquefied petroleum gas (LPG) heating solutions, explains Gregor Dalgleish, commercial sales manager at Calor

[Read More]


30 March 2016

In any workplace, managers have a duty to evaluate the risks associated with that setting and, if there is a boiler installation on site, they are legally bound to keep it working correctly and safely at all times. Chris Coleman, marketing product manager – condensate handling & customer training at Spirax Sarco, looks at some of the key requirements of a boiler house risk assessment and explains how training plays a vital role

[Read More]


24 March 2016

Huddersfield-based craft beer specialist, Magic Rock Brewing, has installed a 100hsp 4VT steam boiler from CFB Boilers to generate steam for a number of vital steam-powered processes. The energy-saving boiler, which comes with future-proof steam capacity, is already helping the brewery towards its aim of quadrupling output within two years

[Read More]


24 March 2016

With the European Commission looking to encourage emissions reductions in line with its 2050 targets, Matthew Walton, contracts manager at Bosch Commercial and Industrial, explains why it is vital for plant operators and plant managers to prepare ahead of the fast approaching implementation of the Medium Combustion Plant Directive (MCPD)

[Read More]


25 November 2015

Efficient energy management in boilerhouses usually concentrates on fireside issues such as fuels and burners, but waterside conditions are every bit as important, as Veolia explains

[Read More]


20 August 2015

Factories and industrial buildings can be complex to manage and will have areas with different heating and hot water requirements. A thorough review of the boilers and water heating equipment can soon show how inefficient products may be wasting energy and money, as Hamworthy Heating explains

[Read More]


16 July 2015

Thermal fluid heaters can be used as a source of heat for industrial processes where high process temperatures are required and, according to Doug Howarth, sales and marketing manager of Fulton, there are circumstances, especially where low running costs is a requirement, where they are more suitable for heat transfer than steam systems

[Read More]


01 April 2015

Babcock Wanson has supplied two 2000kg/h VPX rapid steam generators to Martindale Pharma, a manufacturer and supplier of specialty pharmaceuticals and services for healthcare professionals worldwide.

[Read More]


1/2     (1 to 20 of 36)

SPONSORED CONTENT

1/2     (1 to 15 of 17)

22 August 2017

The Arcotherm EC85 is one of the many duel voltage heating systems we stock at Ideal Heat Solutions. Although one of our heaviest (at 110kg) with an enormous 105L tank capacity, its 80kW heating output capacity makes it a highly effective unit for large sites.

[Read More]


04 May 2016

The J Series is designed to meet the steam raising requirements for process steam across industrial, pharmaceutical, medical, food and drinks industry applications.

[Read More]


22 August 2017

The 500kW containerised boiler plant room is one of our most versatile systems. Sturdy, adaptable for multiple needs, it has all the features to provide consistent hot water and heating for large commercial, domestic and industrial sites.

[Read More]


04 May 2016

A compact high efficiency electric steam boiler, designed for applications with small steam demands, such as laboratories, clothing industries, or food processing.

[Read More]


04 May 2016

• Blowdown Vessels Blowdown vessels are designed to reduce the pressure of the blowdown discharge from the boiler to atmospheric pressure, and also reduces the blowdown discharge to drain to acceptable temperatures for compliance to water bylaws.

[Read More]


22 August 2017

As the name suggests, the Jumbo 150 Archotherm heater is one of the largest we have available at Ideal Heat Solutions. Adaptable and versatile, a 2 or 4-way splitter can be added to this Jumbo unit so it can be ducted up to 160m.

[Read More]


22 August 2017

250kW containerised boiler plant room is an all-in-one unit that’s able to provide hot water and heating for buildings of various sizes and uses. Thanks to its practical design, it’s easy for our OFTEC-approved engineers to install.

[Read More]


22 August 2017

The 1.2MW containerised boiler is the largest of our ready-made packaged plant room systems. It’s able to provide consistent heat up to 90°C for heat and hot water requirements in many different demanding environments.

[Read More]


04 May 2016

Thermal fluid heaters are suitable for process applications requiring temperatures 32°F or above 350°F.

[Read More]


22 August 2017

The Arcotherm EC32 is a highly efficient, dual voltage heating system. With a 29kW heating capacity and 45L tank capacity, it can be used for a whole range of domestic and commercial needs.

[Read More]


19 July 2013

KING’S BOILER HIRE are the UK’s largest providers of temporary industrial boiler plant.

[Read More]


04 May 2016

Electropack is Fulton’s versatile seven-model range designed for steam loads between 29 and 160kg/h.

[Read More]


04 May 2016

Skid-mounted packaged steam boiler systems are factory built on a bespoke basis.

[Read More]


19 November 2018

The all new FFHT32 are a powerful industrial electric fan heaters capable of ducting long distances and delivering high volume airflows with a delta & of 75C, or even holding a room at 60C.

[Read More]


28 April 2016

The Fulton VMP (vertical multiport boiler) incorporate a series of heavy-walled large-diameter schedule 80 flue pipes welded to the top and bottom heads in the pressure vessel; these pipes are surrounded by water.

[Read More]


1/2     (1 to 15 of 17)

VIDEO OF THE MONTH