|
Edward Lowton
Editor |
|
| Home> | Production Engineering | >Welding | >Welding machines |
ARTICLE
Welding machines
25 January 2013
The MIG130T and MIG160T are two new 230V, single phase, DC (Direct Current) MIG welding machines from Weldability- SIF. Both machines are designed for fast, easy operation with 4 adjustable weld settings and are
The MIG130T and MIG160T are
two new 230V, single phase, DC
(Direct Current) MIG
welding machines
from Weldability-
SIF.
Both machines are designed for fast, easy operation with 4 adjustable weld settings and are supplied complete with an integrated MIG torch and 2.5m hose, power cable fitted with 3-pin, 13A plug as well as an earth clamp.
They can be used to weld mild steel using 0.6mm and 0.8mm diameter standard MIG wire or 0.8mm diameter flux cored wire (without gas) on 5kg spools. The output current and the wire feed speeds are controlled using a potentiometer knob on the front panel, whilst heat settings are adjusted using 2 x combination switches.
Both include 0.6 to 0.8mm wire feed rolls and for versatility they feature reversible polarity for use with and without gas.
Both machines are designed for fast, easy operation with 4 adjustable weld settings and are supplied complete with an integrated MIG torch and 2.5m hose, power cable fitted with 3-pin, 13A plug as well as an earth clamp.
They can be used to weld mild steel using 0.6mm and 0.8mm diameter standard MIG wire or 0.8mm diameter flux cored wire (without gas) on 5kg spools. The output current and the wire feed speeds are controlled using a potentiometer knob on the front panel, whilst heat settings are adjusted using 2 x combination switches.
Both include 0.6 to 0.8mm wire feed rolls and for versatility they feature reversible polarity for use with and without gas.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION
