|
Edward Lowton
Editor |
|
| Home> | Production Engineering | >Quality and tolerance testing | >Test stand system |
ARTICLE
Test stand system
25 January 2013
Kistler has launched a modular test stand system designed for testing electric motors and gearing in the research and development laboratory, at production end of line and for quality assurance analysis. The test stands
Kistler has launched a modular test
stand system designed for testing
electric motors and gearing in the
research and development laboratory,
at production end of line and for
quality assurance analysis. The test
stands can incorporate a wide range of
torque and speed sensors with manual
or computer control.
The computer controlled test stands can be equipped with an integrated power analyser with up to 12 voltage and 12 current measurement channels to provide separate efficiency specification for the motor and converter. The load on the motor under test is provided by an active brake working in four quadrants.
The computer controlled test stands can be equipped with an integrated power analyser with up to 12 voltage and 12 current measurement channels to provide separate efficiency specification for the motor and converter. The load on the motor under test is provided by an active brake working in four quadrants.
MORE FROM THIS COMPANY
- Highly dynamic pressure sensor with 500kHz natural frequency
- Small pressure, no problem
- High speed torque sensor
- Non-contact signal transmission
- New torque sensor has magnetoresistive built-in speed sensor and integral, digital measurement conditioning system
- Switchable ranges
- High sensitivity
- Measure of pressure
- Piezoelectric strain sensor
- Rotating dynamometer
OTHER ARTICLES IN THIS SECTION
