
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Plant, Process & Control | >Bearings | >Exceeds 1000h |
ARTICLE
Exceeds 1000h
17 April 2013
NSK has improved the competitiveness of an OEM manufacturer of concrete head vibrators, by providing a bearing substitution and lubrication programme that is delivering operating cost savings of €306 pa on each vibrator, plus improving operating life and reducing maintenance requirements, mainly for replacement bearings.

NSK has improved the
competitiveness of an OEM
manufacturer of concrete
head vibrators, by
providing a bearing
substitution and
lubrication programme
that is delivering
operating cost savings of
€306 pa on each vibrator,
plus improving operating
life and reducing maintenance
requirements, mainly for replacement
bearings.
The OEM manufacturer had specified a deep groove ball bearing as an integral part of the design of a new type of electric poker for concrete head vibrators. NSK replaced the oil used in the application - which didn't have the required viscosity - for a specific NSK oil and, for the bearing used, supplied a larger radial internal Clearance (C4) to allow greater lubrication and increased vibration damping within the bearing unit itself.
The series of four modified bearings were tested and found to exceed 1000 operating hours.
The OEM manufacturer had specified a deep groove ball bearing as an integral part of the design of a new type of electric poker for concrete head vibrators. NSK replaced the oil used in the application - which didn't have the required viscosity - for a specific NSK oil and, for the bearing used, supplied a larger radial internal Clearance (C4) to allow greater lubrication and increased vibration damping within the bearing unit itself.
The series of four modified bearings were tested and found to exceed 1000 operating hours.
MORE FROM THIS COMPANY
- Electromechanics replace hydraulics
- NSK academy adds online training module for food and beverage applications
- Tough bearings
- NSK triple lip seal provides ultimate bearing protection
- Reduces machine tool quadrant glitches
- Short lead times for UK-made NSK linear guides
- Guide on prolonging bearing life for cement producers
- Added value programme
- Low torque technology transfer
- Self-Lube bearing inserts
OTHER ARTICLES IN THIS SECTION