
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Production Engineering | >Lubrication | >increased output; reduced costs |
Home> | Plant, Process & Control | >Process equipment | >increased output; reduced costs |
increased output; reduced costs
02 June 2014
Klüber Lubrication has helped a globally active soft drink producer boost the reliability of its machines and improved lubrication management practices.

One of the plant's seven bottling lines was chosen for the improvement project. Analysis was undertaken and a comprehensive lubrication plan formed.
The plant operates a three-shift system, 24 hours a day. Theoretical filler speed of the bottling line is 24,000 bottles per hour. Prior to consulting Klüber Lubrication, utilisation was 55%: 1760 cases were bottled per hour, equalling 42,240 cases a day. Klüber Lubrication went ahead with its KlüberEfficiencySupport package. Within nine months, production loss due to machine downtime was reduced from 7.4 to 2.5%, resulting in increased production output: throughput increased to 72%, equalling 2304 cases per hour, or 55,296 cases a day – an increase by roughly 13,000 cases or 32% a day.
The increased production capability enabled rapid response to order and delivery schedules and a reduced unit cost of manufacture. In addition, the number of different lubricants was decreased from 47 to 26, resulting in lower storage costs as well as a reduced risk of lubricant mix-up; all without compromising lubricant quality and standards.
The KlüberEfficiencySupport includes lubrication of all equipment throughout the entire bottling line. Klüber Lubrication proceeded in several steps. Based on a comprehensive pre-audit, the objectives to be achieved within a time-frame of 12 months were fixed. The exact requirements of all persons involved in the lubrication process were precisely defined for the first time. In addition, intensive training sessions on lubrication matters took place. All this resulted in increased lubricant awareness and increased beverage safety.
A lubrication plan and a food-grade lubrication regime for all lubrication points was implemented. Oil analyses were conducted as part of preventative maintenance programme. In addition, storage conditions for the lubricants were improved. Klüber Lubrication also with an HACCP audit (Hazard Analysis and Critical Control Points) by implementing only ISO21469 manufacturing site H1 lubricants. Constant monitoring during the adjustment period ensured that all measures were fully implemented and, if need be, adjusted.
This case illustrates the influence lubrication has on the efficiency of machinery. Typical operating cost reductions for a food manufacturing plant can be more than £100,000 per annum. Implementation time for an advanced lubrication program is about six months, with payback in nine to 12 months.
- Reducing wear, boosting efficiency
- Are You Audit Ready?
- Leader in speciality lubricants
- New lubricant is top for the food chain
- KlüberConsult – saving energy and reducing CO2
- Gear lubricant based on water and synthetic base oil
- Eco-compatible open gear lubricant
- Increased output and reduced costs in soft drinks production
- Food Grade Lubricants: Increased Performance and Safety
- New universal sliding fluids to minimise noise in cars