Home >Production Engineering>Fasteners, springs and adhesives
PRODUCTS & SERVICES

1/10     (1 to 20 of 187)

29 September 2021

THE LATEST jetting technology from Nordson EFD is designed to give manufacturers next-level production control.

[Read More]


04 August 2021

THE LATEST handheld dispensers from Henkel provide users with the means to apply its two-component adhesives in all mixing ratios and viscosities.

[Read More]


01 June 2021

COMPONENT SUPPLIER, Accu, has invested upwards of £13,000 on specialist equipment to improve the speed and quality of its in-house thread locking solution.

[Read More]


29 March 2021

CLEAR PRESSURE tanks from SR-TEK help reduce research and development time by allowing engineers and scientists to observe reactions and make changes in real-time.

[Read More]


03 April 2020

Adhesive and sealant supplier, Techsil, has acquired Essex-based adhesive stockist and distributor, Glueline.

[Read More]


16 March 2020

Engineering adhesives manufacturer, Henkel, whose brands include LOCTITE, TEROSON and BONDERITE, has introduced new packaging to thwart those who seek to imitate its products.

[Read More]


25 February 2020

DELO MONOPOX TC2270 is a thermally conductive, electrically insulating adhesive, suitable for bonding silicon die and other applications where rapid heat transfer is essential. It is now available from Inseto, DELO Industrial Adhesives’ distributor in the UK and Ireland.

[Read More]


14 February 2020

Engineering adhesives manufacturer, Henkel, whose brands include LOCTITE, TEROSON and BONDERITE, has introduced new packaging to thwart those who seek to imitate its products.

[Read More]


05 December 2019

Henkel will demonstrate at Southern Manufacturing 2020 how its latest Loctite, Bonderite Technomelt and Teroson products can benefit the entire value chain.

[Read More]


07 November 2019

LOCTITE continues to develop its anaerobic adhesives to expand their scope of application. To provide an overview of how these products can provide 100% leakage safety, Henkel has compiled a new guide.

[Read More]


11 October 2019

The Nord-Lock Group is celebrating the launch of its new Boltight TSR+ auto return tensioner, following several years of development and refinement. The TSR+ boasts a piston retraction time that is said to be four times faster than its nearest competitor.

[Read More]


13 October 2019

Manual, pneumatic, and cordless guns for dispensing two-component adhesive materials are available from Nordson EFD.

[Read More]


10 October 2019

Determining whether a fastener will be attacked by corrosion can be a primary factor in achieving cost efficiency for long-term maintenance.

[Read More]


10 October 2019

At Maintec 2019, Henkel will highlight both the merits of its products and the support it provides.

[Read More]


13 October 2019

Kistler's NCFE servopress solution delivers cost effective simple joining processes. Compared to hydraulic or pneumatic units, the NCFE module is said to offer low energy consumption, simple handling and fast commissioning for applications in the range 10 to 80kN.

[Read More]


24 September 2019

The Schmersal Group is using an innovative Plasma-SealTight technology process for the first time in a pilot project to produce its AZM300 solenoid lock.

[Read More]


23 September 2019

Kistler's NCFE servopress solution is designed for simple joining processes to deliver a cost-effective alternative to conventional pneumatic or hydraulic systems.

[Read More]


23 September 2019

The Nord-Lock Group is celebrating the launch of its new Boltight TSR+ auto return tensioner, following several years of development and refinement.

[Read More]


16 June 2019

To meet growing demand for its contract Form-in-Place Foam Gasketing (FIPFG) service, Techsil has increased production capacity by 25% at its UK site, adding a 4th production cell.

[Read More]


16 June 2019

Techsil has launched adhesive products with low ion content which cure with UV, visible light or moisture.

[Read More]


1/10     (1 to 20 of 187)

FEATURES

1/1     (1 to 15 of 15)

21 September 2021

A major consideration when specifying an adhesive is how quickly it will deliver return on investment (ROI), a metric that is affected by a variety of tangible and intangible factors. Here, Matthew Baseley explains the considerations that determine ROI in an adhesives process

[Read More]


19 November 2020

Threadlocking adhesives have a long and successful history in many industry segments, and there is now growing evidence to suggest the renewable energy sector is increasing its uptake of these advanced products. Colin Chapman takes up the story

[Read More]


11 June 2019

Bonded shrink fit assemblies not only enhance the service life of an assembly but pave the way for new design concepts and cost savings explains Bob Orme, Senior Technology Specialist at Henkel (Industrial Adhesives Division).

[Read More]


09 April 2018

In highly competitive global industries, all aspects of developing and engineering are constantly in the spotlight with continuous improvement always near the top of the agenda. Hadleigh Enterprises believes that component masking considerations merit close attention across the manufacturing and engineering sector.

[Read More]


17 November 2017

A lot of development work has gone into creating epoxies that can withstand 250°C for long periods and which also have a good bond strength at temperature, as Eamonn Redmond, sales manager with Inseto (UK), explains

[Read More]


31 May 2017

Technology has a tendency of changing and evolving every few years, even every few months. Businesses must make sure that they keep up with industry trends, or risk falling behind the competition. Simon Taylor, sales manager at European Springs, explains how the company has employed the latest technology in order to provide a solution for canopies at the London Stadium, home of West Ham United

[Read More]


30 November 2016

Most people are aware of superglue, or cyanoacrylate to give its technical name, but how many know that a whole host of industrial applications can benefit from these advanced adhesives? Bob Goss, senior technology specialist with Henkel, considers the question

[Read More]


03 March 2016

In any mechanical system, the best components only perform optimally if designed to work together and properly connected. Nowhere is this better exemplified than in rotary latching systems, as James Stroud of Southco explains

[Read More]


27 October 2015

Trials are underway that could see the introduction of significant production efficiencies for a major supplier to the aerospace industry. Working with 3M, Zodiac Seats UK is exploring new approaches to working with adhesives to speed throughput in its lay-up, cure and assembly line areas

[Read More]


12 February 2015

The new all-in-one Henkel Loctite Composite Pipe Repair System has recently completed a rigorous two-year test programme by DNV GL, a certification body serving the oil, gas and marine engineering sectors, to ensure the products’ conformity with ISO/TS 24817. Here, Henkel explains more about the system

[Read More]


13 November 2014

Superbolt Expansion Bolts offer a simple and quick bolting solution for large machine couplings and can help save both time and money, as Nord-Lock UK explains

[Read More]


17 February 2014

Engineering adhesives specialist, Henkel, says that its structural bonding technology is increasingly helping robot manufacturers to reap the benefits of new materials by providing a means of joining dissimilar substrates while improving the strength and performance of the overall system.

[Read More]


21 November 2013

When engineering adhesives are employed in cylindrical assemblies, to bond one part that is inserted into another, they are known as retaining compounds or retainers. Here, Bob Orme, senior technology specialist for retaining products at Henkel explains a bit more about the products and, using a couple of case studies, describes their benefits

[Read More]


26 April 2013

Last year caravan manufacturer, Elddis, radically changed its methods of manufacture, favouring a fully bonded structure over one whose elements were mechanically fixed. The outcome, says Henkel, is a shell that is stronger, lighter and drier than ever before

[Read More]


17 April 2013

For structures and equipment operating in harsh environments, springs and spring fasteners must be able to withstand different types of extreme conditions including underwater, outdoors and very high or low temperatures, as global spring company Lee Spring explains

[Read More]


1/1     (1 to 15 of 15)

SPONSORED CONTENT

18 May 2016

The Nord-Lock X-series washer is an exceptional new product, giving customers extreme performance and safety, as well as the extra security of never having to risk making the wrong choice. With Nord-Lock X-series, we bring exciting new ideas to the bolt securing field that expand your design possibilities for excellent results.

[Read More]


18 May 2016

Superbolt multi-jackbolt tensioners (MJTs) replace existing hex nuts. Only hand tools are required for installation and removal of any size tensioner. Safe, accurate and economical! We have a wide range of standard series, as well as an unlimited capacity to create special designs to meet your unique needs.

[Read More]


18 May 2016

Nord-Lock washers secure bolted joints with tension instead of friction. It is a high quality product with documented success in many industries worldwide.

[Read More]


18 May 2016

The Nord-Lock wheel nut safely secures wheels on on-road and off-road heavy vehicles by maintaining high clamping force even under extreme operating conditions.

[Read More]


18 May 2016

Bolt style Superbolt multi-jackbolt tensioners (MJTs) replace existing studs or bolts. Ideal for applications with tapped holes, or where threading a stud into a nut would be impractical. The outside diameter is smaller than a nut type tensioner on a stud, allowing MJTs to fit into tighter areas.

[Read More]


18 May 2016

Key features and benefits

[Read More]


18 May 2016

Flexnuts are used in combination with Superbolt tensioners and are designed to flex out at the bottom and flex in toward the top of the nut. This distributes the bolt load along many threads, adds elasticity, and prevents stress concentrations in the first few threads.

[Read More]


VIDEO OF THE MONTH