
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Production Engineering | >Machine centres and tools | >Turnell & Odell turns to XYZ |
ARTICLE
Turnell & Odell turns to XYZ
25 January 2013
Specialising in precision machining and fabrication, sub-contractor Turnell & Odell caters for prototype development and batch production work, while also providing an emergency breakdown repair service for process cr

Specialising in precision
machining and fabrication,
sub-contractor Turnell &
Odell caters for prototype
development and batch
production work, while also
providing an emergency
breakdown repair service for
process critical machinery.
Although equipped with full- CNC machine tools, including five-axis machining centres,much of the work is allocated to CNC/manual machine tools supplied by XYZ Machine Tool.
Turning work undertaken on CNC/manual lathes ranges from small pins weighing a few grammes to shafts up to 3m long and weighing 1.5t machined on the recently-installed XYZ ProTURN SLX 555 gap-bed lathe. This 3m between centres version has a swing over bed of 555mm and a swing in the gap of 900mm, as well as a 104mm spindle bore. CNC programs can be written off-line but the ease with which the ProtoTRAK control can be programmed means that T&O finds it quicker to program one-offs and low volume work at the machine.
Although equipped with full- CNC machine tools, including five-axis machining centres,much of the work is allocated to CNC/manual machine tools supplied by XYZ Machine Tool.
Turning work undertaken on CNC/manual lathes ranges from small pins weighing a few grammes to shafts up to 3m long and weighing 1.5t machined on the recently-installed XYZ ProTURN SLX 555 gap-bed lathe. This 3m between centres version has a swing over bed of 555mm and a swing in the gap of 900mm, as well as a 104mm spindle bore. CNC programs can be written off-line but the ease with which the ProtoTRAK control can be programmed means that T&O finds it quicker to program one-offs and low volume work at the machine.
MORE FROM THIS COMPANY
- Auto tool change
- New arrival on show at open house
- Machine tools
- XYZ sells 19 machines in two days
- Customers keen to buy
- From design to reality
- Showing that CNC machining is accessible to everyone
- Shared capacity leads to innovation
- XYZ brings 7 machines with live cutting demonstrations to Southern Manufacturing
- Productivity boost for proof machining
OTHER ARTICLES IN THIS SECTION