|
Edward Lowton
Editor |
|
| Home> | Production Engineering | >Welding | >For pro or DIY use |
ARTICLE
For pro or DIY use
25 January 2013
The single phase 230V 50/60Hz MinarcMig Adaptive 170 from Kemppi UK has a load capacity, rated 170A at 25% duty cycle and 120A at 60% duty cycle. The OCV is 22-31V; while the maximum wire feed speed is up to 12m/min.
The single phase 230V 50/60Hz
MinarcMig Adaptive 170 from
Kemppi UK has a load capacity,
rated 170A at 25% duty cycle and
120A at 60% duty cycle. The OCV is
22-31V; while the maximum wire
feed speed is up to 12m/min.
This lightweight, compact, ergonomically designed machine with sturdy casing, is suitable for MIG/MAG welding on site or in the workshop, by both professional and DIY welders carrying out thin sheet metal fabrication, installation and set up work, and general repair and maintenance tasks.
Easy-to-use, it is said to be particularly well suited to welding with ferrous and ferrous flux cored wires with diameters ranging from 0.6 to 1mm diameter fed from 200mm diameter spools.
This lightweight, compact, ergonomically designed machine with sturdy casing, is suitable for MIG/MAG welding on site or in the workshop, by both professional and DIY welders carrying out thin sheet metal fabrication, installation and set up work, and general repair and maintenance tasks.
Easy-to-use, it is said to be particularly well suited to welding with ferrous and ferrous flux cored wires with diameters ranging from 0.6 to 1mm diameter fed from 200mm diameter spools.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION
