|
Edward Lowton
Editor |
|
| Home> | Energy Management | >Boilers and burners | >Royalist range |
ARTICLE
Royalist range
17 April 2013
Hoval's UK-manufactured Royalist range of hot water boilers is available in standard BS EN14394 versions (13 models up to 10 bar and 10MW) and the Royalist-H BS EN12953 high temperature model (13 models to 27 bar and 12MW). Net efficiencies are up to 92% with efficient thermal insulation to reduce standing losses to, typically, 0.3%.
Hoval's UK-manufactured Royalist
range of hot water boilers is available
in standard BS EN14394
versions (13 models up to
10 bar and 10MW)
and the Royalist-H
BS EN12953 high
temperature model
(13 models to 27
bar and 12MW). Net
efficiencies are up to 92% with
efficient thermal insulation to reduce
standing losses to, typically, 0.3%.
The Royalist is a conventional three-pass wet back, steel shell boiler which due to its generous boiler water content, requires no minimum water flow rate. It is suitable for firing with a range of matched burners, for use with gas (including bio-gas), oil (including bio-diesel) or dual fuel. Condensing versions are also available using the Hoval Thermocondensor or bespoke economisers.
The boilers are supplied with sophisticated controls to optimise performance, and are operated on a stand-alone basis or interfaced to a BMS.
The Royalist is a conventional three-pass wet back, steel shell boiler which due to its generous boiler water content, requires no minimum water flow rate. It is suitable for firing with a range of matched burners, for use with gas (including bio-gas), oil (including bio-diesel) or dual fuel. Condensing versions are also available using the Hoval Thermocondensor or bespoke economisers.
The boilers are supplied with sophisticated controls to optimise performance, and are operated on a stand-alone basis or interfaced to a BMS.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION
