|
Edward Lowton
Editor |
|
| Home> | Production Engineering | >Welding | >On site welding |
ARTICLE
On site welding
17 April 2013
MasterTig LT 250 is a 12.6kg air cooled, electronic TIG/MMA welding power source from Kemppi UK that requires no control and mains voltage power cables.
MasterTig LT 250 is a 12.6kg air
cooled, electronic TIG/MMA
welding power source from
Kemppi UK that requires
no control and mains
voltage power cables.
It is powered by a 35mm diameter connection cable from any single parent DC welding power source including mobile welding generators, MIG/MAG and MMA machines with a minimum of 40V pole voltage.
Some suitably sized power sources will be able to run up to four LT250 units at full power at any one time.
With a 90V open circuit voltage and rated 250A for TIG and MMA welding at 35% duty cycle, it has been designed for onsite construction.
It is powered by a 35mm diameter connection cable from any single parent DC welding power source including mobile welding generators, MIG/MAG and MMA machines with a minimum of 40V pole voltage.
Some suitably sized power sources will be able to run up to four LT250 units at full power at any one time.
With a 90V open circuit voltage and rated 250A for TIG and MMA welding at 35% duty cycle, it has been designed for onsite construction.
MORE FROM THIS COMPANY
OTHER ARTICLES IN THIS SECTION
