
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Handling and Storing | >Lift trucks & ancillaries | >Multi-directional forklift with four-wheel steering |
Multi-directional forklift with four-wheel steering
16 March 2022
COMBILIFT HAS released a highly manoeuvrable four-wheel multi-directional forklift for use indoors and on smooth outdoor surfaces, with a low platform that allows users to make the most of the bottom storage space in racking systems.

The Combi-MR4 is a four-wheel electric powered multidirectional reach-truck, which incorporates Combilift’s new Dynamic 360° steering, which provides rotation on each wheel, enabling seamless directional change of the truck while on the move. The system allows this agile forklift to work in forward, sideward and crab steer mode. Hence the full name of the new model: the Combi-MR4 Dynamic 360.
The impetus for the development of this latest addition to Combilift’s portfolio was to develop a multi-directional truck, with a very low platform to maximise storage density within racking. The Combi-MR4 is available in two unique models, with capacity ranges of 2,500Kg - 3,000kg and 3,500Kg - 4,500kg respectively, and can operate in aisles as narrow as 2265mm when guided (based on 1200mm deep material). To maximise all storage space in racking systems the wheel configuration of two drive wheels at the rear and two sets of smaller dual front wheels provides a platform height as low as 380mm, allowing otherwise redundant areas towards the floor to be used.
In keeping with Combilift’s design ethos, Combi-MR4 can handle long loads as well as palletised goods with ease, and can load and offload from delivery trucks. Driver comfort and safety are also major considerations, with a high visibility operator cabin, multi-function control joystick, AC-electric power steering and joystick operated hydraulic mast functions. The articulated rear axle with two rear rubber drive wheels provids traction for outdoor use, while still ensuring nimble and accurate truck placement.
The Dynamic 360° steering concept enables operators to manipulate the truck’s positioning and orientation without the need to stop and change driving mode. Intuitive and easy-to-operate, this is achieved by simply twisting the control joystick right or left to adjust the wheel positions simultaneously – providing crab steering and allowing direction change on-the-go.
Combilift always likes to ensure that any new product has been thoroughly tried and tested in the field to make certain that it is 100% fit for purpose. Following the initial operation of 3,000kg Combi-MR4 units, a 4,500kg model was developed after receiving a request from Combilift’s dealer in the BeNeLux region - Mabo BeNeLux, for a larger capacity unit for their customer TABS (Timber and Building Supplies Holland). One of the Netherlands’ leading suppliers of timber products and building materials, with 104 outlets across the country, TABS has partnered with Combilift and operated its multidirectional trucks for more than 15 years. It now has MR4 trucks at several locations in the Netherlands and is about to take delivery of its 15th and 16th trucks, which will work at its distribution centres in Zaandam and Bleiswijk.
Combilift CEO Martin McVicar said: “TABS are delighted with the ongoing successful implementation of their Combi-MR4s and the improved levels of efficiency thanks to the overall design and features such as low platform height as well as the advanced Dynamic 360° steering system. I have no doubt that this new additional electric model will grow Combilift’s customer base. We are looking forward to showcasing the Combi-MR4 to our existing dealers, and potential new customers during the LogiMAT Intralogistics exhibition in Stuttgart at the end of May”.
Dynamic 360° is a trade mark™