
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Plant, Process & Control | >Boilers and burners | >Pressure-reducing microturbines |
Home> | Energy Management | >Boilers and burners | >Pressure-reducing microturbines |
Pressure-reducing microturbines
19 May 2014
Spirax Sarco has launched a range of pressure-reducing microturbines that generate electricity to reduce utility costs for steam system operators.

Suitable for saturated or superheated steam, Spirax Sarco TR Steam MicroTurbines are available in two sizes, up to 700 kW. Higher electricity outputs are available on request.
The companys says that a microturbine producing 300kW of electrical power can generate cost savings of more than £150,000 per year. The greater the steam demand, the more electricity the turbine will generate and the faster the payback.
Steam is reduced to the required pressure as it travels through the turbine, with the energy released by the pressure drop being used to generate electricity.
Industries with potential for using the microturbines include food and drink, chemical processing, pharmaceutical and any facility with a pressure reduction requirement. The electricity produced can be used locally or exported and sold to the mains power grid.
The compact design of TR MicroTurbines enables them to be fitted into many existing steam systems and they are supplied fully assembled and tested to minimise on-site disruption. Each installation is supported by a full set of Spirax Sarco expert services starting with an analysis of the site and calculations of the projected savings.
As well as saving energy, microturbines help to reduce an organisation’s carbon footprint.
A microturbine system will often be installed in parallel with a conventional pressure reducing station. The unit is usually sized for a baseload (for example, in the summer), so a pressure reducing station will still be needed to cope with peak loads or seasonal demands. This arrangement also allows the microturbine to be taken off line for maintenance without disrupting productivity.
Spirax Sarco TR Steam MicroTurbines can operate at up to 89 bar g and 550°C.
- 1000th BOAS pass
- Energy-saving steam project
- Saving 236t of CO2/year
- Bills slashed
- Gas bills trimmed
- Brewer cuts its energy and hot water costs
- Monitoring system enables energy recovery
- Spirax Sarco delivers energy-saving steam project for €340m new-build hospital
- White Paper outlines benefits of clean steam
- Flash steam recovery trims gas bill