Home>Handling and Storing>Cranes and hoists>First UK installation of Konecranes' S-series crane
ARTICLE

First UK installation of Konecranes' S-series crane

01 February 2021

A MATERIAL handling system incorporating an S-series crane has been supplied by Konecranes to ABB’s Drives Service Workshop (DSW) in Coalville. It is the first installation of the new generation S-series in the UK.

The system supplied comprises a 16.1m span overhead single girder gantry and a 3.29t SWL S-series electric rope hoist. The crane has cross and long travel speeds of up to 20m/min and hoisting speed to 3.1m/min, with a 4.29m height of lift. It is operated via a radio remote controller.

ABB is a worldwide leader in the fields of electrification, robotics, automation and motion technology, with an emphasis on energy saving and sustainability. Its UK operation employs 1800 people, operating from 15 locations and supplies £0.5 billion of innovative solutions, products and services to a broad range of market sectors. The DSW provides reconditioning, preventative maintenance, service, repairs, genuine s

The system supplied comprises a 16.1m span overhead single girder gantry and a 3.29t SWL S-series electric rope hoist. The crane has cross and long travel speeds to 20m/min and hoisting speed to 3.1m/min, with a 4.29m height of lift. It is operated via a radio remote controller.

The S-series crane uses synthetic rope, which requires no lubrication, eliminating the possibility of delicate electronic components within drive units being contaminated with oil.

Smooth movement and accurate load positioning are assured by the crane’s infinite and stepless speed control. A tilted drum and off-set reeving further ensure smooth, accurate load handling.

www.konecranes.co.uk

 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
 
 
TWITTER FEED