PRODUCTS & SERVICES

1/6     (1 to 20 of 118)

 border=
09 September 2021

IN 2015, with business improving but original process equipment reaching end-of-life stage, Rebellion Beer Company, with impartial advice from heat transfer specialist Fulton, replaced its ageing steam boiler with a thermal fluid system. Six years on, Rebellion’s Mark Gloyens explains how brewery life has coped with the switch.

[Read More]


 border=
02 February 2021

A NEW fabrication facility at Lanemark Combustion Engineering in Nuneaton is helping the company meet challenges posed by the current pandemic.

[Read More]


 border=
09 December 2020

A TECHNICAL Boiler House Risk Assessment (TBHRA) not only highlights areas of potential risk for owners, operators and managers, but can identify where enhancements to the steam system could lead to improved energy efficiency.

[Read More]


 border=
04 August 2020

Heat transfer specialist, Fulton, is all too aware of the effect COVID-19 has had on its customers and the wider industry. As many steam boilers have been shut down during this period, it is offering a Restarting Workplace Pressure Systems Safely package.

[Read More]


 border=
06 April 2020

If you’re specifying steam raising plant for a new project, or even replacing ageing steam boilers, Fulton says don’t just consider the initial capital costs, but look at the bigger picture.

[Read More]


 border=
11 March 2020

In response to increasing customer demand, Energy Technology and Control has launched the ETC6076, a 7-inch touch screen HMI for use on the ETC6000 series of burner controllers.

[Read More]


 border=
06 February 2020

A burner upgrade project at a prestigious visitor attraction in Edinburgh involved replacement of the site's 25-year-old burners with Riello ultra-low nitrogen oxides (NOx) premix burners.

[Read More]


 border=
26 November 2019

Riello RX premix packaged burners are available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with high turndown ratios of up to 8:1, across a range of models.

[Read More]


 border=
05 December 2019

Fulton continues to strengthen its team with a number of senior roles changes.

[Read More]


 border=
11 September 2019

Joining Lanemark Combustion Engineering's FD range, the FDB packaged or semi-packaged burner offers additional advantages in terms of location and, importantly, flame profile.

[Read More]


 border=
15 August 2019

Installation of a Fulton VSRT boiler has helped Fillongley Spring Water boost throughput and reduce its gas consumption.

[Read More]


 border=
03 August 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, and turndown ratios of up to 8:1, across a wide range of models.

[Read More]


 border=
23 September 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with turndown ratios of up to 8:1, across a range of models.

[Read More]


 border=
14 June 2019

Launched in 2018, Fulton’s VSRT steam boiler is catching the eye of those judging product and innovation awards.

[Read More]


 border=
05 April 2019

Part of Hoval's high efficiency, low NOx steel shell boiler range, Max-3 E and Max-3 condens E each come in four sizes in outputs to 6800kW in gas and dual fuel options.

[Read More]


 border=
05 April 2019

Based on modular architecture, Lamtec’s CMS (Combustion Management System) offers a high degree of flexibility, allowing users to meet the most demanding of combustion applications.

[Read More]


 border=
10 March 2019

Trend Control Systems, manufacturer of Building Energy Management Systems, has added to its IQ4 controllers an IO module with override functionality, that is available in both analogue and digital variants.

[Read More]


 border=
11 March 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with high turndown ratios to 8:1, across a wide range of models.

[Read More]


 border=
08 March 2019

Riello RX premix packaged burners are now available in outputs to 3MW, offering NOx levels of less than 40mg/kWh, with high turndown ratios of up to 8:1, across a wide range of models.

[Read More]


 border=
08 March 2019

The Max-3 E and Max-3 condens E join Hoval's high efficiency, low NOx steel shell boiler range. Each model is available in four sizes in outputs to 6800kW in gas and dual fuel options.

[Read More]


1/6     (1 to 20 of 118)

FEATURES

1/1     (1 to 12 of 12)

 border=
26 April 2018

Boilerhouse managers and operators are constantly battling with rising energy prices. With pressure to remain competitive and reduce costs, the search to combat energy consumption is top of the wish list. Chris Coleman, boilerhouse national specialist at Spirax Sarco, argues that truly efficient condensate recovery can boost productivity and improve regulation, at a much lower cost to steam users than we might imagine

[Read More]


 border=
23 April 2018

Chris Horsley, managing director of Babcock Wanson explains the efficiency improvements and energy savings that are achievable by using thermal fluid heating systems with integral economisers, and questions why more companies aren't reaping the benefits of this proven technology

[Read More]


 border=
30 May 2017

The Combustion Engineering Association has introduced 'I-GAS', a new qualification for maintenance and gas fitters working in industry. David Kilpatrick, director of the CEA, explains more

[Read More]


 border=
30 March 2017

Industrial boilers can be an expensive item of machinery, and of course, fundamental to keeping plants operational. Given these facts, it’s clear that ensuring that their lifespan is extended as much as possible and that unplanned outages are minimised is essential. It real is a case of 'prevention is better than cure', according to Neil Ford, aftermarket manager at Green’s

[Read More]


 border=
13 March 2017

If you’re currently, or will be in the future, looking to invest in an industrial boiler then these tips from Stephen Fleming, sales project engineer at Byworth Boilers, may help your decision-making process

[Read More]


 border=
06 September 2016

Lower total life costs are among a number of benefits delivered by liquefied petroleum gas (LPG) heating solutions, explains Gregor Dalgleish, commercial sales manager at Calor

[Read More]


 border=
20 August 2015

Factories and industrial buildings can be complex to manage and will have areas with different heating and hot water requirements. A thorough review of the boilers and water heating equipment can soon show how inefficient products may be wasting energy and money, as Hamworthy Heating explains

[Read More]


 border=
01 April 2015

Babcock Wanson has supplied two 2000kg/h VPX rapid steam generators to Martindale Pharma, a manufacturer and supplier of specialty pharmaceuticals and services for healthcare professionals worldwide.

[Read More]


 border=
17 February 2015

Industrial process heating applications that require steam have specific system requirements which can differ significantly from one to the next. Here Rob Brown, technical manager for Industrial Boiler Plants at Bosch Commercial and Industrial Heating, explains why he believes there is a need for each plant to reap the benefits of a bespoke steam boiler system design

[Read More]


 border=
08 December 2014

Modern pressure jet burners provide control features that help to optimise energy efficiency and minimise emissions. Bernard Dawson, technical director of Riello offers some tips on how to take advantage of them

[Read More]


 border=
02 September 2014

A three stage, reverse flow regenerated ion exchange demineralisation system from Veolia Water Technologies has helped slash boiler downtime at the South East London Combined Heat and Power facility (SELCHP), an energy from waste (EFW) facility in Deptford, London

[Read More]


 border=
19 September 2013

It’s absolutely critical to production, yet when did you last spend money on your boiler house? Improving boiler make-up water treatment can significantly reduce energy costs and carbon footprint, as Dave Rouse of ELGA Process Water explains

[Read More]


1/1     (1 to 12 of 12)

SPONSORED CONTENT

 border=
28 April 2016

The Fulton VMP (vertical multiport boiler) incorporate a series of heavy-walled large-diameter schedule 80 flue pipes welded to the top and bottom heads in the pressure vessel; these pipes are surrounded by water.

[Read More]


 border=
04 May 2016

The J Series is designed to meet the steam raising requirements for process steam across industrial, pharmaceutical, medical, food and drinks industry applications.

[Read More]


 border=
04 May 2016

Electropack is Fulton’s versatile seven-model range designed for steam loads between 29 and 160kg/h.

[Read More]


 border=
04 May 2016

• Blowdown Vessels Blowdown vessels are designed to reduce the pressure of the blowdown discharge from the boiler to atmospheric pressure, and also reduces the blowdown discharge to drain to acceptable temperatures for compliance to water bylaws.

[Read More]


 border=
28 April 2016

Developed in response to customer demand for higher capacities than the 1565 kg/h maximum for its vertical range, the nine-model RB/RBC range (with outputs ranging from 957 to 4787 kg/h) can be specified with matched multi-stage oil, modulating gas or dual-fuel burners as standard, with other burners available on request.

[Read More]


 border=
04 May 2016

Skid-mounted packaged steam boiler systems are factory built on a bespoke basis.

[Read More]


 border=
04 May 2016

A compact high efficiency electric steam boiler, designed for applications with small steam demands, such as laboratories, clothing industries, or food processing.

[Read More]


 border=
04 May 2016

Thermal fluid heaters are suitable for process applications requiring temperatures 32°F or above 350°F.

[Read More]


 border=
28 April 2016

Fulton’s FB range can be configured for gas, oil or dual-fuel installations and for either steam or hot water applications.

[Read More]


VIDEO OF THE MONTH